Discontinued itemsSold OutVixen Telescope Digital Camera Quick Bracket II

Features

A large clamp frame (to be attached to the eyepiece). It can be installed on the fieldscope Geoma Series or astronomical telescopes. A camera can be fixed on the bracket with the lock screw (W 1/4). It enables the installment of various types of compact digital cameras. The camera lock screw （W1/4） can also attach a spot finder with a built-in1/4"-20 screw hole.

Connectable Astronomical Telescopes

The eyepiece outer diameter is 34～63mm.

The digital cameras that can be connected to the Digital Camera Quick Bracket II

1/4"-20 screw hole(size: W 1/4") is located on the bottom of the camera. Weight is 300g or lower. Any load heavier than 300g can cause the product to become bent. The height of the center of the lens from bottomis 14～50mm.

The distance from the 1/4"-20 screw hole to the tip of the lens (at a full extention) is 13～85mm. * This applies to the case in which an NLV 20-mm eyepiece is attached to the flip mirror.

The width between the center of the lens and 1/4"-20 screw hole (in the horizontal direction) falls within 53mm. * This applies to the case in which a flip mirror is used.